{"id":3493,"date":"2026-10-21T10:53:05","date_gmt":"2026-10-21T02:53:05","guid":{"rendered":"http:\/\/www.qberitakan.com\/blog\/?p=3493"},"modified":"2026-10-21T10:53:05","modified_gmt":"2026-10-21T02:53:05","slug":"how-do-i-replace-the-brushes-in-a-motor-of-a-vehicle-crane-attachment-459c-185d08","status":"publish","type":"post","link":"http:\/\/www.qberitakan.com\/blog\/2026\/10\/21\/how-do-i-replace-the-brushes-in-a-motor-of-a-vehicle-crane-attachment-459c-185d08\/","title":{"rendered":"How do I replace the brushes in a motor of a vehicle crane attachment?"},"content":{"rendered":"

If you\u2019re reading this, chances are you work with heavy-duty vehicle crane attachments like I do\u2014and you know that when a crane\u2019s electric or hydraulic motor starts faltering, it\u2019s rarely a catastrophic failure right away. More often, it\u2019s a slow, steady decline: the motor struggles to lift light loads, it makes a high-pitched whine when under strain, or you notice erratic movement in the crane\u2019s boom or winch. For nearly 12 years, I\u2019ve run a Motors and Vehicle Crane Attachments company, and I can\u2019t tell you how many times I\u2019ve gotten a call from a crane operator or maintenance tech panicking about \u201cblown motors\u201d when the fix was way simpler: replacing the worn carbon brushes inside. Skip the costly full motor rebuilds or premature replacements\u2014let me walk you through how to do this safely, correctly, and with precision that aligns exactly with the heavy-duty standards we set for every crane attachment we supply. Motors and Vehicle Crane Attachments<\/a><\/p>\n

<\/p>\n

First, let\u2019s ground this in why brush replacement matters for your specific application. The motors in vehicle crane attachments aren\u2019t like the tiny ones in power tools or car windows. They\u2019re built for 24\/7 (or at least heavy, frequent) use, lifting loads ranging from a few hundred pounds to 50+ tons. Those carbon brushes are the unsung heroes here: they\u2019re spring-loaded strips that press against the motor\u2019s commutator (the segmented metal ring inside the motor shaft) to transfer electrical current, turning the rotor and making the crane\u2019s winch, boom, or swing function. Over time, they wear down from friction\u2014exposing metal parts, causing arcing, and reducing current transfer. The key is to catch them before the commutator gets damaged, because repairing a scarred or pitted commutator is exponentially more expensive than just swapping out brushes.<\/p>\n

Before you touch any part of the motor, there are non-negotiable safety steps I can\u2019t stress enough. Crane motors are high-voltage, even if they\u2019re powered by your truck\u2019s electrical system\u2014we\u2019ve had clients forget to disconnect the auxiliary power feed to the crane attachment, leading to accidental startup and serious injury. Start by parking the crane on level ground, setting all brakes, and chocking the wheels to prevent any movement. Then, turn the crane\u2019s ignition and auxiliary power switch to the OFF position, and disconnect the main power cable from the motor. Do not rely on the control switch being off\u2014physically disconnect the connection at the motor housing. Next, mark every wire or component that you remove with painter\u2019s tape and a marker. Crane motor wiring is specific to the attachment\u2019s load capacity and voltage (most run 12V, 24V, or 48V), so misplacing a wire can lead to a motor that runs backwards or won\u2019t start at all. Finally, have a clear workspace\u2014no tools scattered, no nearby debris, and make sure you\u2019re wearing work gloves and safety glasses. One tiny metal shard from the commutator can cause a cut or an eye injury if you\u2019re not careful.<\/p>\n

Now, let\u2019s get to the actual motor disassembly to access the brushes. Every crane attachment motor is a little different, but the process is standard for the industrial, heavy-duty models we supply. First, locate the motor housing: it\u2019s usually bolted directly to the crane\u2019s winch gearbox or swing mechanism, so you\u2019ll need to remove the housing cover. Use a socket wrench set that fits the motor\u2019s bolt heads\u2014never use a screwdriver or pliers, as you\u2019ll strip the bolts, making reassembly impossible. Once the cover is off, you\u2019ll see the rotor (the central metal shaft) and the commutator, which looks like a silver, segmented ring. The brushes themselves are housed in small brush holders on the side of the motor, usually spring-loaded and held in place by a small screw or a retaining clip. Here\u2019s a critical step we teach all our in-house maintenance techs: before removing the old brushes, inspect the commutator first. Run your gloved finger gently over the surface\u2014if it\u2019s pitted, scratched, or has a layer of black carbon dust buildup, you\u2019ll need to lightly sand it with 400-grit sandpaper before installing new brushes. If you skip this step, the new brushes will wear out in days, not months, because they won\u2019t seat properly against an uneven surface.<\/p>\n

Now, remove the old brushes. For most crane motor brush holders, you\u2019ll first use a small flathead screwdriver to gently release the tension spring from the brush. Be careful not to lose the spring\u2014they\u2019re tiny and easy to drop into the motor housing, where they can jam the rotor. Once the spring is loose, pull the old brush straight out of the holder. Important: never pry the brush out or bend it, as carbon brushes crack easily, and a broken brush will leave bits of debris inside the motor. Before moving to install new brushes, take a minute to measure the old brushes. The ideal replacement brush should be within 1\/32 of an inch of the original length\u2014if it\u2019s shorter, the spring won\u2019t press hard enough, leading to arcing. At our company, we only supply OEM (original equipment manufacturer) brushes for every motor model we sell, because generic brushes are made with lower-grade carbon that wears out faster and can damage the commutator. Using the wrong brush is one of the most common mistakes we see from techs who try to save a few dollars.<\/p>\n

Once you have your correct replacement brushes, it\u2019s time to seat them properly\u2014this is what makes the difference between a motor that runs strong and one that falters again in a week. The new brush is a stiff, rectangular piece of carbon that doesn\u2019t yet have the curved shape it needs to fit the commutator\u2019s surface. To shape it, take a strip of 600-grit sandpaper (never coarser than that, as it will scratch the commutator) and wrap it around the commutator, with the abrasive side facing the brush. Slide the brush into its holder, then pull the sandpaper back and forth gently between the brush and the commutator, matching the brush\u2019s shape to the ring\u2019s curvature. Do this for 30 to 60 seconds per brush, until the entire face of the brush is seated evenly against the commutator. Once seated, wipe out any loose sandpaper dust from the motor housing with a clean, dry cloth\u2014any remaining grit will scratch the commutator as the motor runs.<\/p>\n

Now, reinstall the brushes and reassemble the motor. Slide each new seated brush back into its holder, making sure it moves freely (no sticking) and the spring is seated correctly to provide consistent tension\u2014usually around 10 to 15 pounds of pressure, which is standard for crane motors. Tighten the brush holder screw just enough to hold the brush in place, but don\u2019t over-tighten it, as that will restrict movement. Then, carefully put the motor housing cover back on, aligning all the bolt holes, and torque the bolts to the manufacturer\u2019s specifications (you can find this in the crane attachment\u2019s manual, or if you bought it from us, our support team has these specs on file). Once the cover is secure, reconnect the power cable, double-checking that all wires are in their original labeled positions and tight.<\/p>\n

Before you put the crane back to work, test the motor. Disconnect any loads from the crane\u2019s boom or winch, so there\u2019s no pressure on the motor during testing. Turn on the auxiliary power, activate the crane control, and let the motor run for 5 minutes. Listen for any unusual noises\u2014no whines, grinding, or arcing sounds (arcing looks like small blue sparks from the brush holders, which is a sign that the brushes aren\u2019t seated right or the tension is off). After 5 minutes, turn off the power and check the brush holders again: if they\u2019re warm (not hot) and the commutator has a smooth, even look, you\u2019re good to go. If you see sparking or the motor is slow, you\u2019ll need to remove the cover and check the brush tension or seating\u2014don\u2019t put a potentially faulty motor back into service, especially with heavy loads at stake.<\/p>\n

I\u2019ve worked with crane operators and maintenance teams for enough years to know that cutting corners here leads to downtime, lost revenue, and even safety risks. A $20 set of brushes from our Motors and Vehicle Crane Attachments inventory is a fraction of the cost of a full motor replacement or a crane out of service for three days. Most of the time, this entire process takes less than an hour\u2014faster than ordering a new motor and waiting for delivery.<\/p>\n

If you\u2019re unsure about any step, or if you notice that your commutator is more worn than expected, don\u2019t hesitate to reach out. Our team specializes in the parts and support for every type of vehicle crane attachment motor, and we don\u2019t just sell you brushes\u2014we back them up with the expertise to make sure your repair is done right. Whether you need to confirm the correct brush size for your specific motor model, get torque specs for reassembly, or have a tech walk you through troubleshooting mid-repair, our support team is here to help. We know that your crane is critical to your operations, so we prioritize fast, reliable solutions that keep you working safely and efficiently.<\/p>\n

<\/p>\n

Don\u2019t wait until your motor fails mid-lift. Keep a set of OEM replacement brushes for your model in your maintenance kit\u2014they\u2019re small, easy to store, and will save you from a costly, stressful repair down the line. At the end of the day, the key to maintaining your crane\u2019s motor isn\u2019t complicated: it\u2019s regular inspections, using the right parts, and taking the time to do the job correctly.<\/p>\n

Metal Rolling Machines<\/a> References:<\/p>\n

    \n
  1. Industrial Electric Motor Maintenance and Repair, 2nd Edition, McGraw-Hill, 2018<\/li>\n
  2. Crane and Hoist Motor Specification Standards, National Institute for Occupational Safety and Health (NIOSH), 2021<\/li>\n
  3. OEM Component Guidelines for Heavy-Duty Material Handling Equipment, Association of Equipment Manufacturers (AEM), 2022<\/li>\n<\/ol>\n
    \n

    Taiyuan Z.T Gear Machinery Equipment Co., Ltd.<\/a>
    We are one of the most professional motors and vehicle crane attachments manufacturers and suppliers in China, specialized in providing high quality custom service. We warmly welcome you to buy durable motors and vehicle crane attachments made in China here from our factory.
    Address: No.7, Area C, Industrial Park, Taiyuan, Shanxi
    E-mail: 13191002233@139.com
    WebSite:     https:\/\/www.tzgears.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019re reading this, chances are you work with heavy-duty vehicle crane attachments like I do\u2014and … How do I replace the brushes in a motor of a vehicle crane attachment?<\/span>Read more<\/a><\/p>\n","protected":false},"author":276,"featured_media":3493,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3456],"class_list":["post-3493","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-motors-and-vehicle-crane-attachments-4038-18870b"],"_links":{"self":[{"href":"http:\/\/www.qberitakan.com\/blog\/wp-json\/wp\/v2\/posts\/3493","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.qberitakan.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.qberitakan.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.qberitakan.com\/blog\/wp-json\/wp\/v2\/users\/276"}],"replies":[{"embeddable":true,"href":"http:\/\/www.qberitakan.com\/blog\/wp-json\/wp\/v2\/comments?post=3493"}],"version-history":[{"count":0,"href":"http:\/\/www.qberitakan.com\/blog\/wp-json\/wp\/v2\/posts\/3493\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.qberitakan.com\/blog\/wp-json\/wp\/v2\/posts\/3493"}],"wp:attachment":[{"href":"http:\/\/www.qberitakan.com\/blog\/wp-json\/wp\/v2\/media?parent=3493"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.qberitakan.com\/blog\/wp-json\/wp\/v2\/categories?post=3493"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.qberitakan.com\/blog\/wp-json\/wp\/v2\/tags?post=3493"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}